How to make a rubber stamp
A rubber stamp is a raised die that holds ink and transfers it in one press. Making one splits into two jobs: producing artwork the die maker can engrave, and mounting the die so it presses evenly. If you only need the impression and not the object, you can skip the die entirely — print the stamp instead.
1Understand what the die actually needs
A die maker engraves a mirror image into rubber, so your artwork must be a clean vector or a high-resolution bitmap with no anti-aliased edges. Thin hairlines below about 0.4 mm disappear during engraving. Fine text below roughly 6 pt fills in. Design at the final millimetre size, not scaled up.
2Design for the die, not for the screen
Solid shapes engrave more reliably than outlines. If your design has a ring of curved text, leave at least 2 mm between the text and the outer edge so the rubber has something to hold. Avoid gradients entirely — a die is binary: raised or not raised.
3Produce the artwork file
Export SVG or a PDF at the exact size. Avoid PNG for die work unless it is at least 600 dpi at final size, because the engraver traces edges and anti-aliasing turns a clean circle into a jagged one. Our editor exports SVG with the physical size baked in, which is what a die maker wants to receive.
4Have the die made, or skip it
A self-inking rubber stamp costs a few dollars and takes a few days from a local or online stamp shop. You send them the artwork and the size, they mount the die. The alternative: print the same artwork onto matte sticker paper and press it onto the document. It costs cents, arrives in seconds, and for a document that will be scanned anyway the difference is hard to see.
5Ink and press correctly
For a real die: use the ink pad the maker specifies, tap rather than press the die into the pad, and press the die onto the paper with even pressure for about one second. Rocking the die is what produces half-stamped impressions. Re-ink every 20–30 impressions, not when the stamp starts to look faint.
The numbers
| Minimum line weight | ≈0.4 mm at final size |
|---|---|
| Minimum text size | ≈6 pt at final size |
| Best artwork format | SVG or PDF at final mm size |
| If bitmap | 600 dpi or higher at final size |
Questions people actually ask
Can I design the stamp myself and send it to a stamp shop?
Yes, and it is usually cheaper than their design service. Send them an SVG or PDF at the exact size with no effects. Ask what minimum line weight they can hold before you finalise the design.
Do I need a rubber stamp at all?
Only if you want the physical object for repeated use over years. For a handful of documents, a printed stamp on matte sticker paper does the same job for cents.
Why does my stamp come out half-printed?
Uneven pressure — rocking the die instead of pressing flat. It is also a sign of a worn or under-inked pad. Press with two fingers, straight down, one second.
Make it now
The editor runs in the browser — no account, no install. Pick a template, type your text, and download a file that prints at exactly the millimetre size you chose.