How to make a custom stamp
A custom stamp is only as good as its text. Most custom stamps fail for one of two reasons: somebody tried to fit a full address and a phone number onto 38 mm, or the file had no physical size and printed at the wrong diameter. Both are avoidable in ten minutes.
1Write the text before you design
List what must appear: organisation name, the status word, a date or reference. Then cut it in half. A 38 mm stamp comfortably holds about 12 characters on the top arc, two short centre lines, and 12 characters on the bottom arc. Anything beyond that becomes illegible at print size.
2Pick the status word carefully
The centre is the part people read first. PAID, RECEIVED, APPROVED, REJECTED, COPY, ORIGINAL. If your stamp needs to say two things, use the centre for the status and the curved bottom for the qualifier — 'IN FULL', '19 NOV 2026', 'ZONE 2'.
3Choose the size from the form, not from taste
38 mm is the standard document stamp. 32 mm suits a small company stamp or a receipt. 26 mm fits a signature line. 40–50 mm is for certification blocks. If the document has a box for the stamp, measure the box.
4Fix the size in the file
Set the artwork to the millimetre size and export a format that carries that size: SVG (width in mm), PDF (MediaBox), or PNG with a pHYs chunk. Without one of these, the same file can print at 38 mm on one printer and 52 mm on another.
5Choose ink for the paper
Red is the convention for company stamps and reads clearly on white and cream. Black looks more like a photocopy but matches formal documents. Blue reads as a signature. Green and navy are for internal routing. Pick one and keep it consistent — mixed ink colours on one document look improvised.
6Test on the actual paper
Print one and press it onto the paper you will actually use. Cream and off-white stock can make a red stamp look muddy, and thin paper lets the ink bleed. Adjust once, then batch print.
The numbers
| Text budget at 38 mm | ≈12 chars top arc + 2 centre lines + ≈12 chars bottom arc |
|---|---|
| Standard size | 38 mm document, 32 mm receipt, 26 mm signature |
| Size-carrying formats | SVG (mm), PDF (MediaBox), PNG (pHYs) |
| Common inks | Red (convention), black (formal), blue (signature) |
Questions people actually ask
How much text fits on a 38 mm stamp?
About 12 characters on the top arc, two short centre lines, and 12 on the bottom arc. Beyond that the letters get so small they fill in when printed.
What should a custom stamp say?
Organisation name on the top arc, the status word in the centre, and a date or reference on the bottom arc. That covers almost every document case.
Can I use the same stamp on every document?
For a status stamp, yes. For anything with a date, print a batch with the current date and replace it monthly rather than trying to add the date by hand.
Make it now
The editor runs in the browser — no account, no install. Pick a template, type your text, and download a file that prints at exactly the millimetre size you chose.